Chassis Overview; About The Cisco Ncs 4016 Chassis; Chapter - Cisco NCS 4000 Series Hardware Installation

Chassis Overview

This chapter provides an overview of the Cisco NCS 4016 chassis and components.
•
•
•
•

About the Cisco NCS 4016 Chassis

The Cisco NCS 4016 chassis contains an upper card cage and a lower card cage, each with 11 cards (22 total).
The following cards are supported:
• 2 slots for route processor cards (RPs)
• 16 slots for line cards (LCs)
• 4 slots for fabric cards (FCs)
The Cisco NCS 4016 chassis is rack mountable. It is compatible with the following standard rail spacing:
• ANSI 19-inch or 23-inch
• ETSI
For the ANSI 19-inch rack, the minimum front opening must be 17.72 inches (450 mm) to allow for
Note
chassis insertion.The installation kit includes different brackets for each type of rack.
The Cisco NCS 4016 chassis contains its own power and cooling systems. Power systems are available using
AC or DC power. Two fan trays are located in the top and bottom slots of the chassis.
The installation of a Cisco NCS 4016 chassis may require space, power, and cooling modifications to a
Note
facility. Therefore, you should plan the site well in advance of the scheduled delivery of the chassis system.
About the Cisco NCS 4016 Chassis, page 3
Chassis Components, page 8
Chassis Cable Management, page 13
Safety Guidelines, page 13
2
C H A P T E R
Hardware Installation Guide for Cisco NCS 4000 Series
3