Chassis Cable Management - Cisco NCS 4000 Series Hardware Installation

Chassis Overview
Table 25: Slot and Card Symbols
Symbol Color/Shape
Orange/Circle
Pink/Triangle
Blue/Hexagon
Purple/Square
Lilac/Cross

Chassis Cable Management

The Cisco NCS 4009 chassis has cable management features for the front side only. The horizontal cable
management bracket is located above the card cage.
Safety Guidelines
Before you perform any Cisco NCS 4009 chassis installation procedures, review the safety guidelines in this
section to avoid injuring yourself or damaging the equipment.
Review the safety warnings listed in Regulatory Compliance and Safety Information for the Cisco Network
Note
Convergence System 4000 Series before installing, configuring, or troubleshooting any installed card.
Power off the system before removing or installing a power tray.
Note
The following guidelines are for your safety and to protect equipment. The guidelines do not include all
hazards. Be alert.
• Never attempt to lift an object that might be too heavy for you to lift by yourself.
• Keep the work area clear and dust-free during and after installation. Do not allow dirt or debris to enter
• Keep tools and chassis components away from walk areas.
• Do not wear loose clothing, jewelry, and other items that could get caught in the chassis while working
into any laser-based components.
with the chassis and its components.
Definition
Slots LC0 through LC8. Only install line cards with
a circle symbol on the faceplate.
Slots LC0 through LC8. Only install line cards with
circle or a triangle symbol on the faceplate.
Slots LC0 through LC8. Only install line cards with
a blue hexagon symbol on the faceplate.
Slots RP0 and RP1. Only install route processor cards
with a square symbol on the faceplate.
Slots FC0 through FC3. Only install fabric cards with
a cross symbol on the faceplate.
Hardware Installation Guide for Cisco NCS 4000 Series
Chassis Cable Management
159