Feature Buttons And Softkeys - Cisco 8811 Administration Manual

Feature Buttons and Softkeys

Feature
Video Mode
Video Support
Video Through PC
Visual Voicemail
Voice Message System
VPN
Web Access Disabled by Default
Related Topics
Cisco Unified Communications Manager Documentation, on page xvii
Feature Buttons and Softkeys
The following table provides information about features that are available on softkeys, features that are
available on dedicated feature buttons, and features that you need to configure as programmable feature
buttons. An "X" in the table indicates that the feature is supported for the corresponding button type or softkey.
Of the two button types and softkeys, only programmable feature buttons require configuration in Cisco IP
Phone administration.
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
134
Description and more information
Allows a user to select the video display mode for viewing a video conference, depending
on the modes configured in the system.
See video information in the documentation for your particular Cisco Unified
Communications Manager release.
Available on Cisco IP Phone 8845, 8865, and 8865NR.
Enables video support on the phone. The Video Capabilities parameter needs to be
enabled for video calls on Cisco Unified Communications Manager Phone Configuration
window. It is enabled by default.
Available on Cisco IP Phone 8845, 8865, and 8865NR.
Allows users to make video calls by using their Cisco Unified IP Phone, personal
computer, and an external video camera.
The feature also allows users to make video calls with Cisco Jabber or Cisco Unified
Video Advantage products.
Available on Cisco IP Phone 8845, 8865, and 8865NR.
Replaces the voicemail audio prompts with a graphical interface.
See Installation and Configuration Guide for Visual Voicemail located at
www.cisco.com/en/US/partner/products/ps9829/prod_installation_guides_
list.html#anchor3.
Enables callers to leave messages if calls are unanswered.
See voice mail information in the documentation for your particular Cisco Unified
Communications Manager release and
Using SSL, provides a virtual private network (VPN) connection on the Cisco Unified
IP Phone when it is located outside a trusted network or when network traffic between
the phone and Unified Communications Manager must cross untrusted networks.
Enhances security by disabling access to all web services, such as HTTP. Users can only
access web services if you enable web access.
Set up Visual Voicemail, on page
http://
179.