Visual Voicemail Setup For A User Group - Cisco 8811 Administration Manual

Procedure
Step 1 In Cisco Unified Communications Manager Administration, choose Device > Phone.
Step 2 Select the device associated to the user you are searching for.
Step 3 In the Related Links drop-down, choose Subscribe/Unsubscribe Services and click Go.
Step 4
Select the VisualVoiceMail Service you created, then choose Next > Subscribe.

Visual Voicemail Setup for a User Group

To add a batch of Cisco IP phones to Cisco Unified Communications Manager with Visual Voicemail
subscribed, create a phone template in BAT tool for each phone type and in each phone template. You can
then subscribe to the Visual Voicemail service, and use the template to insert the phones.
For more information, see
model.html.
Set up AS-SIP
Depending on how you have configured your phone system, you may be able to make priority calls using the
Assured Services for SIP Lines (AS-SIP) feature.
With this feature, routine calls are placed normally. However, during an emergency, you can select a priority
level that helps ensure the delivery of critical calls. Depending upon how your phone is configured, you may
have to sign-in also.
When you receives a priority call, a precedence level icon displays next to the caller's name on your phone.
Procedure
Step 1 In Cisco Unified Communications Manager Administration, choose Device > Device Settings > SIP Profile.
Step 2 Select a profile.
Step 3
Set the Is Assured SIP Service Enabled check box.
This setting provides specific Assured Service behavior that affects services such as Conference factory and
SRTP.
Step 4
Enable MLPP Authorization for a device by checking the MLPP User Authorization check box.
When the MLPP User Authorization check box is enabled, the system challenges the AS-SIP phone for the
user's credentials when a precedence call is made.
Step 5 Set the Resource Priority namespace.
An AS-SIP phone is associated with a single Resource Priority namespace.
If <None> is left as the namespace in the SIP profile, then the default namespace is used.
All devices using this profile must be restarted.
http://www.cisco.com/c/en/us/support/unified-communications/visual-voicemail/
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
Phone Feature Configuration
181