Appendix G. Regulatory Compliance - GE Mentor Visual iQ User Manual

Appendix G. Regulatory Compliance

European Community — CE Notice:
The mark indicates compliance with the essential requirements of Directive 1999/5/EC. Such marking is indicative that this equipment meets or exceeds the
following technical standards:
EN 300 328
EN 301 893
EN 301 489-1/EN 301 489-17
EN 62311
European Equipment Classification
Group 1, Class A
The mark on this product indicates it has been tested to and conforms with the provisions noted within the 2004/108/EC Electromagnetic Compatibility Directive. The
Visual iQ system is in conformance with the following standard: EN61326-1.
Declarations of Conformity are held by GE Inspection Technologies GmbH:
GE Inspection Technologies
GmbH Product Service Center
Lotzenäcker 4
72379 Hechingen Germany
Tel: +49(0) 74719882 0
Fax: +49(0) 74719882 16
Safety Mark
The Visual iQ system is in compliance with the following standards:
UL 61010-1, IEC 61010-1, EN 61010-1 and CSA-C22.2 No. 61010-1.
Additional Certification Testing
MIL-STD-461F: RS103, RE102–Above Deck
MIL-STD-810G: 506.5, 507.5, 509.5, 510.5, 511.5, 514.6, 516.6, 521.3
UN / DOT T1-T8
75
07/30/2014