Measuring Features And Indications - GE Mentor Visual iQ User Manual

Videoprobe

Hide thumbs Also See for Mentor Visual iQ:

Quick start manual (2 pages)

Table of Contents

Measuring Features and Indications

About Measuring

The Visual iQ allows you to measure features or indications either before or after saving an image. You can save up to five measurements per image. In order to perform 3D Phase

Measurements (3DPM) or stereo measurements, the image must be captured using a 3DPM, or stereo tip. All saved measurement images can be re-measured on a PC using soft-

ware from GE's Inspection Technologies. For details, visit the GE-MCS website at http://www.ge-mcs.com/en/remote-visual-inspection/software.html

You can save measurement images as JPEGs or bitmaps. You can view these files, including the measurement results, in most .BMP or .JPG viewing applications, such as Windows

Paint

(click here to learn about image-saving settings).

Notes:

-Measurement results are valid only when taken in air. To measure through liquid, contact GE Inspection Technologies.

-GE Inspection Technologies cannot guarantee the accuracy of measurements calculated by the Visual iQ system. Accuracy varies with the operator's ability.

-The Visual iQ system can display measurement images that were captured on the Everest XLG3™ and XLGo VideoProbe systems, including their previously captured measurements.

However, you cannot re-measure these images on the Visual iQ.

07/30/2014

Table of Contents