Working With A Split Screen - GE Mentor Visual iQ User Manual

07/30/2014

Working with a Split Screen

A split screen displays two images side-by-side in any combination of live, frozen, or
recalled. Since half-screen still images are cropped, dragging a finger across the display
or moving the joystick allows you to pan side-to-side within the image.
1
– Press at any time to launch the Split Screen feature. One half of the screen will initially
show a live image, the other shows a frozen version of the image that appeared when
Split Screen was selected.
Note: To exit Split Screen mode, press
2
– Each displayed image will be identified as either Live, Frozen (FF), or Recalled.
3
– Select which image is active by touching either side of the split screen, or by selecting
this soft key, or moving the joystick left or right. Only one image is active at a time, as
indicated by the blue outline around the active image.
4
– Change the magnification of the active image by zooming IN or OUT
learn more about the Zoom feature).
5
– Select to Recall a stored image into whichever side of the display is currently active
(Click here to work with Recalled images).
6
– Temporarily displays the active image as a full screen. This action DOES NOT cause
the display to exit Split Screen mode.
7
– Measurement mode available for still images. This soft key is labeled with the most
advanced measurement mode (3DPM, Stereo, or Comparison) available for the active
still image. It allows measurement to be entered with the active image. Exiting from
measurement will return to the current Split Screen view.
about Comparison measurement mode).
until a full-screen reappears.
(Click here to
(Click here to learn more
35