Image & Video Setup - GE Mentor Visual iQ User Manual

24
Image & Video Setup
1
– Tap the on-screen GE Logo (or press the
Global Menu, then open the Setup Menu.
2
– Select to Image and Video related settings and defaults.
3
– Follow the procedure shown here to change either the Image Save Location or
Video Save Location. These represent the two locations where quick-save images
or videos are automatically stored. In the example shown here, these locations are
both initially set to the D: drive. Press the Select soft key and then choose the desired
directory path. When the desired storage location is opened, select the Done soft key
to complete the process.
4
– Using the process outlined above, the default Image Save Location is changed to
C:\TestImages\Images\FolderA\. This is the location into which quick-saved images will
be stored (Click here to learn more about Saving Images).
5
– Choose either BMP or JPEG as the default image file type.
6
– Set the video recording format to either H.264 High or H.264 Low.
learn more about Working with Video).
7
– Determines if the microphone icon (at right) appears in the display's
bottom right corner during video recording. When displayed, tap the
icon to mute or unmute the recording of sound along with video.
here to learn more about muting or turning sound ON when recording
live video.
8
– When set to Default, the system
will normally recognize the connected
Microphone. Alternatively, choose a
microphone from those available (choices
are only those devices already connected
to the Visual iQ or paired via Bluetooth).
9
– When set to Default, the system will normally recognize the connected Speaker.
Alternatively, choose a speaker from those available (choices are only those devices
that are already connected to the Visual iQ or paired via Bluetooth).
10
– Should a not-yet-defined tip configuration require an alternative Distortion
Correction Table, Contact GE Technical Support. A table supplied by GE Technical
Support will include instructions on how to Import the file.
11
– When set to OFF, the menu-directed inspection stage name is not saved in the
image but will still appear during the MDI process.
hard key) to open the
(Click here to
Click
07/30/2014