System Setup - GE Mentor Visual iQ User Manual

07/30/2014

System Setup

1
– Tap the on-screen GE Logo (or press the
Global Menu, then open the Setup Menu.
2
– Select to alter the system-specific settings shown here.
3
– Drag your finger up or down the screen. This bar will move to show the current
position among the list of system-specific settings.
4
– Tap to open the virtual keyboard and create or change a System Password. Once
created, accessing the iQ's operating sceens requires first entering the password. This
password is for the entire system and is not associated with the active profile.
Note: Entering a password requires the
5
– Select and follow the on-screen prompts to restore the active
Default Settings.
Executing a White Balance
A white balance corrects the color so that white appears white despite any slight hues
that may exist under the lighting conditions present when performed.
6
– Select New and follow the prompts to point probe at a white target or select Default
to restore factory color settings.
Loading a Logo
A logo can be loaded onto the display screen provided it is PNG file type (with dimensions
smaller than 140 x 140).
7
– Select Load, then navigate the instrument or an external drive to select any PNG file
type as the on-screen logo. Click here for more information on creating and loading
a personalized logo file.
Setting Date and Time
8
– Adjust Time and Date settings.
9
– Select the Time Zone in which you are operating.
hard key) to open the
Default Profile be active.
Profile to the Factory
19