Wpa, Wpa2, Or Wpa + Wpa2; Wep - NETGEAR DGN2200M User Manual

WPA, WPA2, or WPA + WPA2

Note: WPA-PSK, WPA2-PSK (AES), or WPA-PSK (TKIP) + WPA2-PSK
(AES) security is required for the Up to 145 Mbps or Up to 300 Mbps
Mode setting.
Both WPA and WPA2 provide strong data security. WPA with TKIP is a software
implementation that can be used on Windows systems with Service Pack 2 or later, WPA2
with AES is a hardware implementation; see your device documentation before implementing
it. Consult the product documentation for your wireless adapter for instructions for configuring
WPA settings.
Note: If you use a wireless computer to configure wireless security
settings, you will be disconnected when you click Apply. If this
happens, reconfigure your wireless computer to match the new
settings, or access the wireless modem router from a wired
computer to make further changes.

To configure WPA or WPA2 in the wireless modem router:
1. Select Wireless Settings.
2. Select the radio button for the WPA or WPA2 option of your choice. The settings displayed
on the screen depend on which security option you select.
3. For WPA-PSK or WPA2-PSK, enter the passphrase.
4. To save your settings, click Apply.

WEP

WEP encryption is available only when the Mode setting is Up to 54 Mbps.
Note: If you use a wireless computer to configure wireless security
settings, you will be disconnected when you click Apply.
Reconfigure your wireless computer to match the new settings, or
access the wireless modem router from a wired computer to make
further changes.
N300 Wireless ADSL2+ Modem Router DGN2200Mv2
Wireless Network Configuration
26