3G Mobile Broadband Settings - NETGEAR DGN2200M User Manual

3. Click Apply to apply and save your changes, or Cancel to discard your changes.
Table 1. Broadband Settings
Setting
Internet Connection Mode
Failover Detection Method
1
Retry Interval is
1
Failover after
1
Resume after
Enable Hardware link detection
(Checkbox and text field)
1. This field is available only when the Internet Connection Mode is Use Ethernet first and if fail use 3G
mobile connection.

3G Mobile Broadband Settings


To configure your 3G mobile broadband Internet settings manually:
1. Select 3G Mobile Broadband Settings.
This opens the 3G Mobile Broadband Settings configuration screen. This screen allows
you to configure the broadband account access for your NETGEAR Modem.
Figure 4. 3G Mobile Broadband Settings Configuration Screen
N300 Wireless ADSL2+ Modem Router DGN2200Mv2
Description
Select one of the following:
• Use ADSL first and if fail use Mobile Broadband connection
• Always use Mobile Broadband connection
• Always use ADSL connection
1
Select the failover method and enter the following information:
• DNS lookup using WAN DNS Server
• Perform a DNS lookup by a hostname
If you select this option, you must also enter the DNS lookup
hostname in the text field to the far right of this option.
• Ping this IP address
If you select this option, you must also enter the IP address in the
text field to the far right of this option.
Enter the retry interval in seconds.
Enter the number of retry attempts to perform before failing over.
Enter how long to wait for primary link to be stabilized before
resuming use of the primary link.
To enable, select the checkbox and enter the amount of time in
seconds to wait before failing over if the Ethernet link is dropped. This
is independent of the DNS/Ping detection methods.
Internet Configuration
12