NETGEAR DGN2200M User Manual page 15

N300 Wireless ADSL2+ Modem Router DGN2200Mv2
The following table describes the Basic Settings screen fields and options.
Settings
Does Your ISP Require a Login?
These fields Account Name
appear only if no (If required)
login is required.
Domain Name
(If required)
These fields Login
appear only if
Password
your ISP
requires a login.
Service Name
Idle Timeout (In
minutes)
Internet IP Address
Domain Name Server (DNS)
Address
Description
• Yes
• No
Enter the account name provided by your ISP. This might also be called the
host name.
Enter the domain name provided by your ISP.
The login name provided by your ISP. This is often an e-mail address.
The password that you use to log in to your ISP.
If your ISP provided a service name, enter it here.
If you want to change the Internet login time-out, enter a new value in
minutes. This determines how long the wireless modem router keeps the
Internet connection active after there is no Internet activity from the LAN.
Entering an Idle Timeout value of 0 (zero) means never log out.
• Get Dynamically from ISP. Your ISP uses DHCP to assign your IP
address. Your ISP automatically assigns these addresses.
• Use Static IP Address. Enter the IP address that your ISP assigned.
Also enter the IP subnet mask and the gateway IP address. The gateway
is the ISP's wireless modem router to which your wireless modem router
will connect.
• Use IP Over ATM (PoA). This option is available only if your ISP does not
require a log in.
The DNS server is used to look up site addresses based on their names.
• Get Automatically from ISP. Your ISP uses DHCP to assign your DNS
server address automatically.
• Use These DNS Servers. If you know your ISP does not automatically
transmit DNS addresses to the wireless modem router during login, select
this option, and enter the IP address of your ISP's primary DNS server. If
a secondary DNS server address is available, enter it also.
Internet Configuration
15