NETGEAR DGN2200M User Manual page 9

N300 Wireless ADSL2+ Modem Router DGN2200Mv2
Select one of the following:
• Use ADSL connection first and if fail 3G Mobile Broadband connection.
• Always use Mobile Broadband connection.
• Always use ADSL connection.
4. Click Next to display the following screen.
5. Click Next. Initially, a connection detection progress screen displays. When the router
successfully detects the connection, additional screens display.
a. Enter your Internet service provider (ISP) configuration information. Select your
country and your Internet service provider. If login credentials are required by your
ISP, enter your user name and password. Click Next.
b. Depending on the type of connection detected, you are prompted to enter your ISP
settings. These may be one of the following:
• PPPoE or PPPoA: This displays the PPPoE configuration screen. Enter the login
user name and password. These fields are case-sensitive.
• Dynamic IP account setup: No entries are necessary.
• IP over ATM Classical IP assignment (RFC1577): Enter the assigned IP
address, subnet mask, and the IP address of the primary DNS server for your ISP.
If a secondary DNS server address is available, enter that also. DNS servers
translate an Internet name such as
• To configure a static IP address: For instructions, see
Setup on page 10.
6. At the end of the Setup Wizard, click Test to check your Internet connection.
Note: If you have trouble connecting to the Internet, see
Troubleshooting
7. After the test succeeds, click Apply to apply and save your configuration settings.
www.netgear.com
for help.
Internet Configuration
9
to a numeric IP address.
Fixed IP (Static) Account
Chapter 7,