NETGEAR DGN2200M User Manual page 46

N300 Wireless ADSL2+ Modem Router DGN2200Mv2
Field
ADSL Port MAC Address
IP Address
Network Type
IP Subnet Mask The IP subnet mask used by the Internet (ADSL) port.
Gateway IP
Address
Domain Name
Server
PPPoE Session
2 IP Address
PPPoE Session
2 Subnet Mask
PPPoE Session
2 Gateway IP
address
LAN Port MAC Address
IP Address
DHCP
IP Subnet Mask This field displays the IP subnet mask being used by the local (LAN) port of
Modem ADSL Firmware
Version
Modem Status
DownStream
Connection
Speed
UpStream
Connection
Speed
VPI
VCI
Description
The Ethernet MAC address being used by the Internet (ADSL) port.
The IP address used by the Internet (ADSL) port. If no address is shown,
the wireless modem router cannot connect to the Internet.
The network type depends upon your ISP.
IP address used as a gateway to the Internet for computers configured to
use DHCP.
The DNS server IP addresses used by the wireless modem router. These
addresses are usually obtained dynamically from the ISP.
This field displays the Ethernet MAC address being used by the local (LAN)
port of the wireless modem router.
This field displays the IP address being used by the local (LAN) port of the
wireless modem router. The default is 10.0.0.2.
If Off, the wireless modem router does not assign IP addresses to PCs on
the LAN.
If On, the wireless modem router does assign IP addresses to PCs on the
LAN.
the wireless modem router. The default is 255.255.255.0.
The version of the firmware.
The connection status of the modem.
The speed at which the modem is receiving data from the ADSL line.
The speed at which the modem is transmitting data to the ADSL line.
The Virtual Path Identifier setting.
The Virtual Channel Identifier setting.
Manage Your Network
46