Configure Wpa/Wpa2 Enterprise Wifi Security - NETGEAR C6250 User Manual

8. Set up and test your WiFi devices and computers to make sure that they can connect over
WiFi.
If they do not, check the following:
• Is your WiFi device connected to your network or another WiFi network in your area?
Some WiFi devices automatically connect to the first open network (without WiFi
security) that they discover.
• Does your WiFi device display as a connected device in the web management
interface? (See
connected to the network.
• Do you use the correct network name (SSID) and password? The default SSID and
default password are on the product label.

Configure WPA/WPA2 Enterprise WiFi Security

Remote Authentication Dial In User Service (RADIUS) is an enterprise-level method for
centralized Authentication, Authorization, and Accounting (AAA) management. To provide
WPA/WPA2 enterprise WiFi security, the WiFi network that the modem router provides must
be able to access a RADIUS server.
Note: WPS and WPA/WPA2 enterprise security cannot function together.
When you enable WPA/WPA2 enterprise security, WPS is disabled.
Tip: If you want to change the WiFi settings of the modem router's main
network, use a wired connection to avoid being disconnected when
the new WiFi settings take effect.
To configure WPA/WPA2 enterprise security:

1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net.
A login window opens.
3. Type admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home page displays.
5. Select Wireless.
The Wireless Setup page displays.
6. In the Security Options section, select the WPA/WPA2 Enterprise radio button.
AC1600 WiFi Cable Modem Router
View Devices Currently on the Network
Manage the Basic WiFi Network Settings
41
on page 104.) If it does, it is