Casio QT-7300 Service Manual page 34

4-17-3. Network Driver Installation under Windows 2000
This section describes in detail the important steps when installing the SBC8360-4M network drivers under
Windows 2000.
1. Select the Start button at the bottom left corner of the screen then click on Settings.
2. Choose Control Panel from the left and the following window appears on your display.
3. Double click on System icon
4. In the System Hardware dialog box, click on Device Manager.
5. Double click on Network Adapter.
6. Double click on Realtek RTL8139(A).... .
7. In the Driver Dialog Box, Click on Update Driver... .
8. In the Update Device Driver Wizard window, Click on Next.
9. Choose "Display a list of all drivers... ", then click on the Next button to proceed.
10. Insert the EtherNet RTL8139 Driver diskette (Disk 3) into Drive A: and clock on Have Disk.
11. Enter the appropriate drive for your disk media (A:win2000), and click on OK
12. Choose Realtek RTL8139 (A/B/C/8130) PCI Fast Ethernet NIC.
13. Click on Next at the select Device dialog box.
14. In the Start Device Installation window, click on Next.
15. In the Digital Signature Not Found window, click on Yes.
16. In the Confirm File Replace window, click on Yes.
17. Click on the Finish button to complete the installation of the PCI Ethernet Controller.
18. Right after completing the network adapter installation, the system displays the network window requiring
you to fill up your computer's name, the workgroup it will appear in, and a short description of it. Refer to the
following screen.
19. After filling up the items, press the Close button to exit.
20. Your system will now ask you whether you'd like to reset the computer. Click on the Yes button.
NOTE: We highly recommend that you reset the system in order for the new network driver to take effect.
— 32 —