Casio QT-7300 Service Manual page 20

• Error Halt <All errors>
The category determines whether the computer will stop if an error is detected during power up.
• Memory
The category is display-only which is determined by POST (Power On Self Test) of the BIOS.
4-14-2-2. BIOS Features Setup
Virus Warning
CPU Internal Cache
External Cache
CPU L2 Cache ECC Check
Processor Number Feature
Quick Power On Self Test
Boot Sequence
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Gate A20 option
Typematic Rate Setting
Typematic Rate (Chars/Sec)
Typematic Delay (msec)
Security Option
PCI/VGA Palette Snoop
Assign IRQ for VGA
OS Select for DRAM > 64MB
Report No FDD for Win95
• Virus Warning <Disabled>
• CPU Internal Cache / External Cache < Enabled >
These two speed up memory access. However, it depends on the CPU/chipset design.
• CPU L2 Cache ECC Checking < Enabled >
When enabled, this allows ECC checking of the CPU's L2 cache.
• Quick Power On Self Test < Enabled >
• Boot Sequence < A,C,SCSI >
This option sets the sequence of boot drives either floppy drive A or hard disk drive C or CDROM that
Award BIOS attempts to boot from after POST completes
• Swap Floppy Drive < Disabled >
This option enables the floppy swap function. The setting is Enable or Disable.
• Boot Up Floppy Seek < Disabled >
This option enables Award BIOS seek on floppy drive A before booting the system. The settings is
Enabled or Disabled.
Boot Up NumLock Status < On >
•
This option enables and disables the numberlock function of the keypad.
Gate A20 option < Fast >
•
ROM PCI/ISA BIOS (2A69KA5C)
BIOS FEATURES SETUP
AWARD SOFTWARE, INC.
: Disabled Video BIOS
: Enabled C8000-CBFFF
: Enabled CC000-CFFFF
: Enabled D0000-D3FFF
: Enabled D4000-D7FFF
: Enabled D8000-DBFFF
: A,C,SCSI DC000-DFFFF
: Disabled
: Disabled
: On
: Fast LCD Type : (Type 8) 800x600 TFT
: Disabled VGA Expansion (Full Screen) : Enable
: 6 Display Type During POST
: 250 Display Type After POST
: Setup
: Disabled ESC : Quit
: Enabled F1 : Help
: Non-OS2 F5 : Old Values
: Yes F6 : Load BIOS Defaults
F7 : Load Setup Defaults
— 18 —
< Screen shows all default setting >
Shadow : Enabled
Shadow : Disabled
Shadow : Disabled
Shadow : Disabled
Shadow : Disabled
Shadow : Disabled
Shadow : Disabled
: Both
: Both
↑ ↓ → ←
: Select Item
PU/PD/+/- : Modify
(Shift) F2 : Color