Casio QT-7300 Service Manual page 10

8. Release the 7 screws of the connector panel and
release the 10 connector screws. Then, remove the
connector panel.
9. Remove the connector from the Touchscreen con-
troller. Then remove the Multi-I/O conversion card.
Remove the Multi-I/O
conversion card.
10.Release the 2 screws of the side connector cover
and the 2 connector screws. Then, remove the side
connector cover and the KB /Mouse/External FDD
conversion card.
The side connector cover
Remove 2 screws.
Release the 2 connector screws.
Release the 2 screws.
— 8 —
Remove 10 connector screws.
Remove 3 screws.
Remove the connector from the
Touchscreen controller.
The KB/Mouse/External FDD
conversion card
Remove 2 screws.