Casio QT-7300 Service Manual page 28

4-14-2-6. Integrated Peripheral Setup
IDE HDD Block Mode
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
IDE Secondary Master UDMA : Auto
IDE Secondary Slave UDMA : Auto
On-Chip Primary PCI IDE
On-Chip Secondary PCI IDE : Enabled
USB Keyboard Support
Init Display First
POWER ON Function
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
The four items related to the WDT describe the set up of the Watchdog Timer (WDT), please refer to the 4-15
for details.
• IDE HDD Block Mode < Disabled >
Block mode is also called block transfer, multiple commands, or multiple sector read/write. If your IDE
hard drive supports block mode (most new drives do ), select Enabled for automatic detection of the
optional number of block read/write per sector the drive can support.
• IDE Primary Master
• IDE Primary Slave
• IDE Secondary Master
• IDE Secondary Slave
The four IDE PIO (Programmed Input/Output) field let you set a PIO mode (0-4) for each of four IDE
devices that the onboard IDE interface supports. Modes 0 though 4 provide successively increased
performance. In Auto mode, the system automatically determines the best mode for each device.
NOTE: Secondary drives are not support.
• IDE Primary Master
• IDE Primary Slave
• IDE Secondary Master
• IDE Secondary Slave
Ultra DMA/33 implementation is possible only if your IDE hard drive supports it and the operating
environment includes a DMA driver (Windows98 or a third-party IDE bus master driver). If your hard
drive and your system software both support Ultra DMA/33, select Auto to enable BIOS support.
NOTE: Secondary drives are not support.
ROM PCI/ISA BIOS (2A69KA5C)
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
: Enabled UART Mode Select
: Auto
: Auto
: Auto
: Auto Onboard Parallel Port
: Auto Parallel Port Mode
: Auto
Onboard Parallel Port 3
: Enabled Onboard Parallel Port 4
: Enabled
: PCI/ISA
: BUTTON ONLY
ESC : Quit
: Enabled F1 : Help
: 3F8H/IRQ4 F5 : Old Values
: 2F8H/IRQ3 F6 : Load BIOS Defaults
F7 : Load Setup Defaults
PIO < Auto >
PIO < Auto >
PIO < Auto >
PIO < Auto >
< Auto >
UDMA
UDMA < Auto >
UDMA < Auto >
UDMA < Auto >
— 26 —
< Screen shows all default setting >
: Normal
: 378H/IRQ7
: SPP
: 3E8H/IRQ10
: 2E8H/IRQ11
↑ ↓ → ←
: Select Item
PU/PD/+/- : Modify
(Shift) F2 : Color