Networkservices Wifi Enabled; Networkservices Xmlapi Mode - Cisco DX70 Administrator's Manual

Cisco DX70 and DX80

Introduction

NetworkServices WIFI Enabled

Provided that the video system is allowed to connect to the network via Wi-Fi (see the
NetworkServices WIFI Allowed setting), you can use this setting to enable and disable Wi-
Fi.
You cannot use Ethernet and Wi-Fi at the same time. If you try to configure Wi-Fi while an
Ethernet cable is connected, you must unplug the Ethernet cable to proceed. If you connect
an Ethernet cable while connected to Wi-Fi, Ethernet will take precedence. If you unplug
the Ethernet cable, the video system will automatically connect to the last connected Wi-Fi
network, if available.
Requires user role: ADMIN
Default value: False
Value space: False/True
False: Wi-Fi is disabled.
True: Wi-Fi is enabled.

NetworkServices XMLAPI Mode

Enable or disable the video system's XML API. For security reasons this may be disabled.
Disabling the XML API will limit the remote manageability with for example TMS, which no
longer will be able to connect to the video system.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: The XML API is disabled.
On: The XML API is enabled (default).
D15362.02 DX70 and DX80 Administrator Guide CE8.3, JANUARY 2017.
Configuration Peripherals Maintenance
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
85
Administrator Guide
System settings System settings Appendices