Cisco DX70 Administrator's Manual page 8

Cisco DX70 and DX80

Introduction Introduction
HTTP feedback in JSON format
HTTP feedback can be sent in JSON (JavaScript Object
Notation) format for third-party feedback interpreters, as
an alternative to XML (eXtensible Markup Language) .
TMS uses XML by default, and does not support JSON
formatted feedback.
Configurable network speed
You can configure the Ethernet link speed from the web
interface or the xAPI. This is in alignment with other video
systems running CE software.
You can choose to autonegotiate the link speed (default),
or force it to:
• 10 Mbps half-duplex
• 10 Mbps full-duplex
• 100 Mbps half-duplex
• 100 Mbps full-duplex
• 1 Gbps full-duplex
• In general, we recommend not to change from the
default value, where the video system negotiates with
the network to set the speed automatically.
D15362.02 DX70 and DX80 Administrator Guide CE8.3, JANUARY 2017.
Configuration Peripherals
Keypad for DTMF tones available on the web
interface
We have added a keypad to the Call Control page of the
web interface. The keypad is available when in call, and
can be used to send DTMF tones to the far end when
required.
New languages
We have added support for EnglishUK and SpanishLatin
to the on-screen display and user interfaces.
Maintenance
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
8
Administrator Guide
System settings Appendices