Userinterface Settings; Userinterface Contactinfo Type; Userinterface Keytones Mode; Userinterface Language - Cisco DX70 Administrator's Manual

Cisco DX70 and DX80

Introduction

UserInterface settings

UserInterface ContactInfo Type

Choose which type of contact information to show on the Home screen, and when you tap
the Settings icon.
Requires user role: ADMIN
Default value: Auto
Value space: Auto/None/IPv4/IPv6/SipUri/SystemName/DisplayName
Auto: Show the address which another system can dial to reach this system. The
address depends on the system registration.
None: Do not show any contact information.
IPv4: Show the system's IPv4 address.
IPv6: Show the system's IPv6 address.
SipUri: Show the system's SIP URI (refer to the SIP URI setting).
SystemName: Show the system's name (refer to the SystemUnit Name setting).
DisplayName: Show the system's display name (refer to the SIP DisplayName setting).

UserInterface KeyTones Mode

You can configure the system to make a keyboard click sound effect (key tone) when typing
text or numbers.
Requires user role: ADMIN, USER
Default value: Off
Value space: Off/On
Off: There is no key tone sound effect.
On: The key tone sound effect is turned on.
D15362.02 DX70 and DX80 Administrator Guide CE8.3, JANUARY 2017.
Configuration Peripherals Maintenance

UserInterface Language

Select the language to be used in menus and messages on the screen.
Requires user role: ADMIN, USER
Default value: English
Value space: Arabic/Catalan/ChineseSimplified/ChineseTraditional/Czech/Danish/Dutch/
English/EnglishUK/Finnish/French/FrenchCanadian/German/Hebrew/Hungarian/Italian/
Japanese/Korean/Norwegian/Polish/PortugueseBrazilian/Russian/Spanish/SpanishLatin/
Swedish/Turkish
Select a language from the list.

UserInterface OSD EncryptionIndicator

Define for how long the encryption indicator (a padlock) is shown on screen. The icon for
encrypted calls is a locked padlock, and the icon for non-encrypted calls is a crossed out
locked padlock.
Requires user role: ADMIN
Default value: Auto
Value space: Auto/AlwaysOn/AlwaysOff
Auto: If the call is encrypted, a "Call is encrypted" notification is shown for 5 seconds,
while the encryption indicator icon is shown for the duration of the call.
If the call is not encrypted, a "Call is not encrypted" notification is shown for 5 seconds.
Also the encryption indicator icon disappears from screen after 5 seconds.
AlwaysOn: The encryption indicator is displayed on screen during the entire call.
AlwaysOff: The encryption indicator is never displayed on screen.
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
106
Administrator Guide
System settings System settings Appendices