Networkservices Ssh Allowpublickey; Networkservices Ssh Mode; Networkservices Telnet Mode; Networkservices Welcometext - Cisco DX70 Administrator's Manual

Cisco DX70 and DX80

Introduction

NetworkServices SSH Mode

SSH (or Secure Shell) protocol can provide secure encrypted communication between the
codec and your local computer.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: The SSH protocol is disabled.
On: The SSH protocol is enabled.

NetworkServices SSH AllowPublicKey

Secure Shell (SSH) public key authentication can be used to access the codec.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: The SSH public key is not allowed.
On: The SSH public key is allowed.

NetworkServices Telnet Mode

Telnet is a network protocol used on the Internet or Local Area Network (LAN) connections.
Requires user role: ADMIN
Default value: Off
Value space: Off/On
Off: The Telnet protocol is disabled. This is the factory setting.
On: The Telnet protocol is enabled.
D15362.02 DX70 and DX80 Administrator Guide CE8.3, JANUARY 2017.
Configuration Peripherals Maintenance

NetworkServices WelcomeText

Choose which information the user should see when logging on to the codec through
Telnet/SSH.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: The welcome text is: Login successful
On: The welcome text is: Welcome to <system name>; Software version; Software
release date; Login successful.

NetworkServices WIFI Allowed

DX video systems that have a built-in Wi-Fi adapter, can connect to the network either via
Ethernet or Wi-Fi. They cannot connect to both at the same time. The systems support
the following standards: IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, and IEEE 802.11n. The
following security types are supported: WPA-PSK TKIP, WPA2-PSK AES, and open (not
secured).
Both Ethernet and Wi-Fi are allowed by default. Use this setting if you want to prohibit the
use of Wi-Fi.
Some DX video systems ship without the built-in Wi-Fi adapter (the PID, which you find on
the rating label at the rear of the video system, are CP-DX80-NR-K9=, or CP-DX70-W-
NR-K9= for these units). These systems do not get the option to configure Wi-Fi at all.
Requires user role: ADMIN
Default value: True
Value space: False/True
False: Wi-Fi cannot be used. You must connect to the network via Ethernet.
True: Both Ethernet and Wi-Fi are allowed.
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
84
Administrator Guide
System settings System settings Appendices