Standby Settings; Standby Audiomotiondetection; Standby Control; Standby Delay - Cisco DX70 Administrator's Manual

Cisco DX70 and DX80

Introduction

Standby settings

Standby AudioMotionDetection

The video system is able to automatically discover that people are in its proximity. Given
that this feature is switched on, the video system wakes up from standby when someone is
detected.
Requires user role: ADMIN
Default value: Off
Value space: Off/On
Off: Detection of people in proximity of the video system is switched off.
On: Detection of people in proximity of the video system is switched on.

Standby Control

Define whether the system should go into standby mode or not.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: The system will not enter standby mode.
On: The system will enter standby mode when the Standby Delay has timed out.
Requires the Standby Delay to be set to an appropriate value.

Standby Delay

Define how long (in minutes) the system shall be in idle mode before it goes into standby
mode. Requires the Standby Control to be enabled.
Requires user role: ADMIN
Default value: 10
Value space: Integer (1..480)
Set the standby delay (minutes).
D15362.02 DX70 and DX80 Administrator Guide CE8.3, JANUARY 2017.
Configuration Peripherals Maintenance
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
101
Administrator Guide
System settings System settings Appendices