NEC UNIVERGE SV8100 Features & Specifications Manual page 1170

Issue 5.0
Program
Number
20-21-02
20-28-01
20-28-02
20-28-03
21-01-01
21-01-03
25-07-07
1 - 1160
Program Name
System Options for Long
Conversation – Long
Conversation Alarm 2
Trunk to Trunk Conversation –
Conversation Continue Code
Trunk to Trunk Conversation –
Conversation Disconnect Code
Trunk to Trunk Conversation –
Conversation Continue Time
System Options for Outgoing
Calls – Seizure Trunk Line Mode
System Options for Outgoing
Calls – Trunk Interdigit Time
(External)
System Timers for VRS/DISA –
Long Conversation Warning
Tone Time
Description/Comments
After hearing the first warning
tone, the system sends additional
warning tones after this time
(0~64800 seconds). The warning
tones continue, spaced by this
time, until the user hangs up.
Enter a single digit Continue Code
for the DISA call to use to
immediately disconnect or
continue their outside call (0~9,
#
or are accepted entries).
Enter a single digit Disconnect for
the DISA call to use to
immediately disconnect or
continue their outside call (0~9,
#
or are accepted entries).
When Program 14-01-25 is
enabled, determine the time a call
is extended when the user dials
the Continue code (defined in
Program 20-28-01).
When a trunk is selected does it
select it based off the Trunk Route
Priority (0) or based off the trunk
that has not been used in the
longest time.
The system waits for this time to
expire before placing the call in a
talk state (Call Timer starts after
time expires, Voice Over and
Barge-In are not allowed until after
time expires).
Determine the time the system
should wait before the Warning
Tone is heard by DISA callers
(0~64800 seconds). If an outside
call is transferred or forwarded
off-premise using an outside trunk,
this time starts immediately. This
occurs if either trunk involved in
the call is programmed for the
Warning Tone (Program
14-01-17).
Warning Tone for Long Conversation
UNIVERGE SV8100
Assigned Data
0~64800 (seconds)
(default = 180)
*
0~9, #,
(default not assigned)
*
*
0~9, #,
(default not assigned)
*
0~64800 (seconds)
(default = 0 seconds)
0 = Priority Route
1 = Circular Route
(default = 0)
0~64800 (seconds)
(default = 5 seconds)
0~64800 (seconds)
(default = 3600
seconds)