Toro Power Max Service Manual page 84

DISCHARGE CHUTE
5. Lift the chute and defl ector off of the auger cover
(Fig. 210).
6. There is a ring on the base of the chute that is
secured with three screws (Fig. 211).
10-2
Fig 210
MVC-885X
Fig 211
MVC-804X
7. If necessary the defl ector can be separated from the
chute by removing the hinge (Fig. 212).
8. The last chute component is the chute guide. It is
attached to the auger cover with one screw in front
and tabs on the rear (Fig. 213).
Fig 212
MVC-807X
Fig 213
MVC-891X
Power Max Service Manual