Toro Power Max Service Manual page 45

7. Remove the crankshaft pulley capscrew (Fig. 079),
the front section of the pulley and the belt.
8. Loosen the 2 set screws on the auger pulley. A long
extension and a ratchet will be necessary
(Fig. 080).
Power Max Service Manual
Fig 079
MVC-011X
Fig 080
MVC-003F
AUGER GEARBOX
9. Remove two capscrews on each side that secure the
auger bearings to the auger side plate (Fig. 081).
10. Disconnect the spring on both ends of the pivoting
scraper (Fig. 082).
Fig 081
MVC-769X
Fig 082
MVC-787F
7-3