Toro Power Max Service Manual page 63

14. Now you can remove the other half of the axle shaft
with the 44-tooth gear (Fig. 130).
15. Remove the two screws from the shift rod bracket
and remove the traction control lever and bracket
assembly from the friction wheel (Fig. 131 and 132).
Power Max Service Manual
TRACTION DRIVE SYSTEM
Fig 130
MVC-860XYZ.jpg
Fig 131
MVC-859X.jpg
WHEEL CLUTCH
16. If not already done, remove the bearing retainer that
holds the hex shaft (Fig. 133).
Fig 132
MVC-860X.jpg
Fig 133
MVC-864XYZ.jpg
9-5