Belt Adjustment - Toro Power Max Service Manual

3. Move the link to the side and let it rest in the saddle
provided (Fig. 066). Reach down alongside the link
and remove the belt from the lower pulley. Then
remove the belt from the crankshaft pulley.
4. Reverse the process to install a new belt.
5. Check for proper clearance between the belt and
belt guide. Engage the auger belt and look between
the belt and belt guide on the left side. There should
be about 1/8" (3.2mm) gap (Fig. 067). Tighten the
belt guide mounting bolts.
Power Max Service Manual
Fig 066
MVC-888XB
Fig 067
MVC-822X
BELT REPLACEMENT

Belt Adjustment

Belt adjustments are made by adjusting the control
cables. See the Controls Section for the procedure.
5-3