Toro Power Max Service Manual page 69

6. Before mounting the friction wheel assembly, install
the chains onto the 8-tooth sprockets making sure
the closed end of the master link is going in the
direction of rotation in the forward gears (Fig. 153
and 154).
Power Max Service Manual
TRACTION DRIVE SYSTEM
Fig 153
MVC-051X.jpg
Fig 154
MVC-867X.jpg
WHEEL CLUTCH
7. Install both bearing retainers (If both were removed)
(Fig. 155).
8. Before installing the axle with the 44-tooth sprockets
apply a light coat of anti-seize to the outer 5 inches
of both ends of the axle shaft. Also apply a light coat
to the inside diameter at both ends of the tube about
4 inches (Fig. 156).
Fig 155
MVC-864XYZ.jpg
Fig 156
MVC-046X.jpg
9-11