System Troubles; User Codes - Honeywell Galaxy TouchCenter Plus User Manual

System Troubles

The Security screen also displays an icon(s) next to each trouble in a table. If a trouble icon is shown, contact your alarm company. The following
icons may be shown as applicable to your system:
ICON
AC Loss – The system is not receiving AC power
Low Battery – The battery that powers the system during an AC power loss is low or an RF device has a low battery
Comms Line Fail – The communications module has a line fail
Device Alarm – There is an alarm on the device shown
Zone Trouble – There is a zone fault
Tamper Alarm or Fault – There is a tamper alarm on the device shown or it is faulty
Note: When there are multiple faults you can use the up and down arrows next to the fault table to scroll through the list of faults.

User Codes

Each user must be assigned a name with a corresponding 4 to 6 digit User PIN in order to gain access to authorised features and functions. Users of
the system are programmed in a central user setup location that provides the specific questions for authorisation level, and group assignment.
About the System (cont'd)
MEANING
8