Honeywell Galaxy TouchCenter Plus User Manual page 20

Setup a WIFI (WLAN) Connection
On the IP Setup screen, add a WIFI network connection as follows:
ICON
1. On the Home screen, press the
enter an authorised code.
2. Press the IP Setup
3. Press the
WIFI ON
4. Do one of the following:
a) Use the scroll bar to locate a network from the list of
Wi-Fi Networks to connect to and highlight that
field. If your router is not listed press the
icon.
b) If your router is not listed, even after refreshing the
list, scroll to the bottom of the list and select
. Highlight each field to enter the required
Network
information for SSID, Security Mode, and
Passphrase / Shared Key on the
Keyboard and press
5. Press the Save icon. Pressing
port number resets the keypad.
Setup (cont'd)
ACTION
Setup icon, and then
icon.
button.
Refresh
Add
Data Entry
Go .
Save when changing the
A pop-up window displays:
This will switch off LAN Network, do you want to continue?" Yes or
No
Use the Data Entry Keyboard to enter the required information.

Press the up arrow key to switch to capital letters.

Press the Space key to add a space between characters.

Press the x key to delete/backspace.

Press the ABC/.?123/Åå key to switch between numerals and
symbols/characters.
A pop-up window displays the message:
Success
WIFI Network Saved
20
NOTES