How To Omit Zones; How To Clear Omitted Zones - Honeywell Galaxy TouchCenter Plus User Manual

How to Omit Zones

Use the omit function when you want to set your system with one or more zones left open. Omitted zones are unprotected and do not cause an alarm
when violated while your system is set.
To omit zones:
ICON
1. On the screen, press the
Home
and then enter an authorised code.
2. Press the More Sets
3. Press the Omit Set
4. Highlight the zone(s) to be omitted and press
the Toggle Omission
5. Press the
Back
screen.

How to Clear Omitted Zones

An omitted zone is automatically re-instated when you disarm the system. If a zone is omitted, you can re-instate it as follows:
ICON
1. Press the
Omit Set
2. Select the omitted zones.
3. Press the
Toggle Omission
Security (cont'd)
ACTION
Note: If any zones are omitted or faulted, a Display Faults icon is also displayed
icon,
Security
on this screen.
icon.
While the keypad is requesting and receiving the zone data from the control
icon.
panel, the screen displays Please Wait!. The zones, along with their current
status, are then displayed.
icon.
icon to return to the
Setting
ACTION
icon.
While the keypad is requesting and receiving the zone data from the control
panel, the screen displays Please Wait! The zones, along with their current
status, are then displayed.
icon.
NOTES
NOTES
14