Honeywell Galaxy TouchCenter Plus User Manual page 24

ICON
1. Connect a Cat5/6 cable to your camera (LAN) and connect the
opposite end to an Ethernet connection on your router.
2. Apply power to the Camera. It may take a few seconds for
initial power-up of camera.
3. Apply appropriate settings to the camera by dedicated camera
tool
4. On the screen press the
Home
code (or press the
icon. The Camera List
5. Press the Discover
6. If the camera information is not automatically obtained please
check the settings from point 3 and press
Discover Add Edit
Notes:

To use the Pan/Tilt feature, select the camera name from the camera list and then press Pan/Tilt.
Multi-Media (cont'd)
ACTION
icon and an authorized
Camera
icon followed by the
Multimedia Camera
screen is displayed.
icon to locate the camera.
again.
Discover
Setup Icons
Delete Delete Settings
All
Camera Play Auto
Wifi Pan
24
NOTES
Camera Icons
Quad Full Pan/Tilt Back
View View