How To Check The Status Of Groups; How To View The Event Log - Honeywell Galaxy TouchCenter Plus User Manual

How to Check the Status of Groups

This system supports between one and thirty two groups (depending on the system). Grouping enables a single physical alarm system to control up to
32 areas of protection (groups) depending on the system you have purchased.
Note: Some systems may not have groups in which case the
To check the status of groups:
ICON
1. On the Home
then enter an authorised code.
2. Press the
Group Status
Or
1. On the
Home
then enter an authorised code.
2. Press the
System Version
3. Press the Group Status
The status of each group is displayed.

How to View the Event Log

Your system has the ability to record various events in a history log in which each event is recorded with the time and date of its occurrence.
To view the :
Event Log
ICON
1. On the
Home
then enter an authorised code.
2. Press the More Choices
3. Press the
Event Log
are displayed. Use the on screen controls to view
events in the list or to find and filter events.
Security (cont'd)
Group List
ACTION
screen, press the Security icon, and
icon.
screen, press the icon, and
Setup
icon.
icon.
ACTION
screen, press the icon, and
Security
icon.
icon. The first seven events
screen is not displayed.
The Group List screen is displayed.
There are a number of controls you can use in the events screen:

You can filter by type of event, for example Set/Unset events only.

You can filter events per group.

More: use this control to toggle between event data and event data
showing the group affected.
16
NOTES
NOTES