System Information; Ip Setup And Network Connections - Honeywell Galaxy TouchCenter Plus User Manual

System Information

To view the current software/firmware version installed on your system, do the following:
ICON
1. On the Home screen, press the
then enter an authorised code.
2. Press the
System Info

IP Setup and Network Connections

IP Address Setup
In most cases, IP addresses are assigned automatically (the
can be found by accessing your router. Refer to your router instructions.
Setup a LAN Connection
On the screen, add a LAN network connection as follows:
IP Setup
ICON
1. Connect an Ethernet cable between the router and the
keypad and setup any video cameras.
2. On the screen, press the
Home
enter an authorised code.
3. Press the IP Setup
4. Press the
LAN ON
5. Press the
Save
automatically updated.
6. Return to the IP Setup
information is displayed.
7. If the IP address is not displayed, change the
Connection type
the necessary IP information from your router. Press
the Save icon; the IP information is automatically
updated.
Setup (cont'd)
ACTION
Setup icon, and
icon.
Obtain address auto
ACTION
icon, and then
Setup
icon.
button.
icon: the IP information is
screen. Check that the
Internet
to , and then manually enter
Static
NOTES
The following information is displayed: MAC Address, CRC, Software
version and Firmware version.
setting). However, you may require a static (fixed) IP address that
A popup window displays:
This will switch off WLAN Network, do you want to continue? Yes
or No
Use the Data Entry Keyboard to enter the required information.
Press the up arrow to switch to capital letters.

Press the Space key to add a space between characters.

Press the x key to delete/backspace.

Press the ABC/.?123/Åå key to switch between numerals and
symbols/characters.

Press Go to return to the IP Setup screen.
19
NOTES