Clean Screen; Routine Care - Honeywell Galaxy TouchCenter Plus User Manual

To select the desired screen timeouts:
ICON
1. On the screen, press the
Home
then enter an authorised code.
2. Press the Display Setup
3. Press the desired timeout button.
4. Use the up/down arrows to change the timeout.
5. Press the icon.
Save
Note: If you make changes and exit without saving,
the
Display Setup changed. Do you want to save it?
message is displayed.

Clean Screen

With the exception of normal cleaning, the keypad is maintenance free.
To clean the touch screen:
ICON
1. On the Home screen, press the
then enter an authorised code.
2. Press the
Display Setup
3. Press the Clean Screen
4. Press Continue , and then wipe the screen.
IMPORTANT: Do not use an abrasive cleaning agent or abrasive cloth when cleaning the touch-screen or damage to the touch-screen may occur.

Routine Care


Treat the components of your security system as you would any other electrical equipment. Do not slam sensor-protected doors or windows.

Keep dust from accumulating on the keypad and all protective sensors, particularly on motion sensors and smoke detectors.

Carefully dust the keypad case and sensors dry soft cloth. Do not spray water or any other fluid on the units.
Setup (cont'd)
ACTION
icon, and
Setup
icon.
ACTION
Setup icon, and
icon.
icon.
NOTES
Settings include:

Backlight Off After time

Return To Homepage After time

Auto Slideshow After time
Notes:

The To Homepage After default time is 2 minutes.

When in EN50131 mode, backlight off is the only option you can change
and Auto Slideshow After is disabled.
NOTES
When the Continue button is pressed the following message is displayed:
Touch Screen has been disabled so that you may wipe the screen
clean. Please use a damp soft cloth. DO NOT use any liquids, sprays, or
ammonia-based cleansers.
Touch Screen Disabled for ≥ 30 Seconds
When the counter reaches zero, the window automatically closes and the
touch screen is active.
18