GE RX3i User Manual page 272

SNTP Local Time Corrections (LTC) and Daylight Savings Time (DST)
Parameters (task n) – RX7i and Rack mounted ETM support only
nltc_offset This signed value indicates the hours and minutes of the offset
of local time from UTC. The minutes must be specified by one
of four values, 0, 15, 30, or 45.
ndst_offset The offset between DST and standard time in hours and
minutes, where the minutes are limited to the values 0, 15, 30,
and 45.
ndst_start_m The month when DST begins.
onth
ndst_start_ The day of the week when DST begins.
day 1 = Sunday
7 = Saturday
ndst_start_ The number of the occurrence of ndst_start_day in the month.
week (1 is the first occurrence.)
ndst_start_ The time, in hours and minutes, when DST begins.
time
ndst_ref_ Indicates the time zone of reference for ndst_start_time and
zone ndst_end_time.
L = Local Time
U = UTC
ndst_end_ The month when DST ends. Note that in the southern
month hemisphere, this value will be smaller than the start value.
ndst_end_da The day of the week when DST ends.
y 1 = Sunday
7 = Saturday
ndst_end_ The number of the occurrence of ndst_end_day in the month.
week (1 is the first occurrence.)
ndst_end_ The time, in hours and minutes, when DST ends.
time
Modbus TCP/IP Client Parameters (task o)
GFK-2224Q
Appendix A. Configuring Advanced User Parameters
January 2017
Default Range
0:00 -12:45 to +14:45
None 0:15 to 1:00
None 1 – 12
None 1 – 7
None 1 – 4
None 0:00 – 23:59
None L or U
None 1 – 12
None 1 – 7
None 1 – 4
None 0:00 – 23:59
None None
259