Installing The Id Card - Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual

Basic hardware procedures
Figure 22: Installing the rack mounting frame (B)
Ê Ensure that the rack mounting brackets properly engage on both sides of the
chassis as shown.
Ê Secure the rack front cover with two M3 x 4.5 mm screws on either side.
4.5.1.2

Installing the ID card

Figure 23: Installing the ID card (rack server)
Ê Insert and slide the ID card into its slot until it locks in place as shown.
75
TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual