Front Vga Connector; Installing The Front Vga Connector; Preliminary Steps - Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual

Front panel and external connectors
"Enabling SVOM boot watchdog functionality" on page 130
Ê
"Resuming BitLocker functionality" on page 136
Ê
13.2

Front VGA connector

13.2.1 Installing the front VGA connector

Upgrade and Repair Unit
(URU)
Tools: – Slotted screw driver for removing the front VGA dummy cover
– Phillips PH0 / (+) No. 0 screw driver

13.2.1.1 Preliminary steps

"Suspending BitLocker functionality" on page 111
Ê
"Locating the defective server" on page 55
Ê
"Shutting down the server" on page 58
Ê
"Disconnecting the power cord" on page 59
Ê
"Getting access to the component" on page 61
Ê
"Removing the system air duct" on page 91
Ê
"Removing the system fan holder" on page 93
Ê
"Removing the front panel module" on page 437
Ê
442
Upgrade and Maintenance Manual
Hardware: 10 minutes
TX2560 M2 / RX2560 M2