Concluding Steps; Replacing An Fbu; Preliminary Steps - Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual

Ê If you want to remove the FBU adapter cable:
Ê Remove the SAS RAID controller as described in section
expansion cards from standard slots" on page
Ê Disconnect the FBU adapter cable from the TFM.
Ê Install the SAS RAID controller as described in section
expansion cards in standard slots" on page
9.4.3.3

Concluding steps

"Reassembling" on page 74
Ê
"Connecting the power cord" on page 87
Ê
9.4.4

Replacing an FBU

Upgrade and Repair Unit
(URU)
Tools: tool-less
V
CAUTION!
Do not throw battery backup units into the trash can. Batteries must be
disposed of in accordance with local regulations concerning special
waste.
For further safety information, please refer to section
protection" on page
9.4.4.1

Preliminary steps

"Disabling SVOM boot watchdog functionality" on page 112
Ê
"Locating the defective server" on page 55
Ê
"Shutting down the server" on page 58
Ê
"Disconnecting the power cord" on page 59
Ê
"Getting access to the component" on page 61
Ê
"Locating the defective component" on page 57
Ê
TX2560 M2 / RX2560 M2
Expansion cards and backup units
52.
Upgrade and Maintenance Manual
"Removing
300.
"Installing
295.
Hardware: 10 minutes
"Environmental
327