Section E - Control And Management Interfaces - Cisco D9040 User And Service Manual

Section E - Control and Management Interfaces

Ethernet Management Interface
Number of connectors
Type of connector
Ethernet type
Required setup
Alarm Interface
Number of outputs
Type of connector
Max. voltage
Max. current
Contact Closure Interface
Connector type
Usage
8 contacts
Cue Trigger Interface
Connector type
Usage
Input Impedance
Nominal input level
Input level range
A-18
Item
Item
Item
Item
Technical Specifications
Specification
1
Eight-pin RJ-45, MDI
10/100 Base-T
IP address, default gateway and subnet
mask
Specification
3, each having one set of contacts closed
and one set open during normal operation.
Alarms are signalled by reversing the
polarity of the two contact sets.
9-pin sub-D female
≤ 30 V AC, ≤ 60 V DC
≤ 1 Α
Specification
Terminal block
DPI according to SCTE 35
Ground + Input/sense
Specification
Terminal block (shared with contact closure
inputs)
DPI according to SCTE 35
> 20 kW
0 dBu
-18 dBu to +6 dBu
4020024 Rev C