Calling More Than One - Cisco EX90 User Manual

Cisco TelePresence System EX90
Contents Introduction

Calling more than one

Calling several to initiate a video conference is an
optional feature. If your system permits it, you may
define two participants and then call them both in
one go.
Enter a number or URI, or pick an entry from
the Directory, the list of Favorites, or from the
History.
Repeat the procedure to
add a second participant.
D14724.06 User guide EX90, TC4.2, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Connecting the EX90 Using the EX90 Using the EX90
list of participants to be
When both have been added, tap
START to call them all.
The settings
Tap
ADD PARTICIPANT
as outlined to create a
called.
18
Web interface Contact us
The entry will appear on the bottom line of the
touch pad, as outlined.
Tap END to terminate the entire
conference. To disconnect just
one of the participants, tap the
participant's name along the
bottom line and then tap END.
www.cisco.com
User guide