Row Position Pattern (Holes1) - Siemens SINUMERIK 828D Operating Manual

Parameter
X0
C0
Y0
Z0
Y1 ...Y7
Z1 ...Z7 (only for ShopTurn
9.1.12

Row position pattern (HOLES1)

Function
You can program any number of positions at equal distances along a line using the "Row
position pattern" function.
Procedure
Parameter Description
LAB Repeat jump label for position
(only for G code)
PL Machining plane
(only for G code)
Machining
Face C
•
surface
Face Y
•
Peripheral surface C
•
(only for Shop-
Turn)
Peripheral surface Y
•
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Description
Peripheral surface Y:
Reference point in X direction (abs)
Positioning angle for machining surface
Y coordinate of 1st position (abs)
Z coordinate of 1st position (abs)
Y coordinate for additional positions (abs or inc)
Incremental dimension: The sign is also evaluated
Z coordinate for additional positions (abs or inc)
Incremental dimension: The sign is also evaluated
1. The part program or ShopTurn program to be processed has been cre-
ated and you are in the editor.
2. Press the "Drilling" softkey.
3. Press the "Positions" and "Row" softkeys.
The "Position row" input window opens.
Programming technology functions (cycles)
9.1 Drilling
Unit
mm
Degrees
mm
mm
mm
mm
Unit
341