Position Pattern Line (Holes1), Grid Or Frame (Cycle801) - Siemens sinumerik 840D sl Operating Manual

Parameters Description
Peripheral surface C - cylindrical:
C0 C coordinate of 1st position (abs)
Z0 1. Position of hole with reference to Z axis (abs)
C1 ...C7 C coordinate for additional positions (abs or inc)
Incremental dimension: The sign is also evaluated.
Z1 ... Z7 Additional positions in the Z axis (abs or inc)
(only for
Incremental dimension: The sign is also evaluated.
ShopTurn)
Peripheral surface Y:
X0 Reference point in X direction (abs)
C0 Reference point
Y0 Y coordinate of 1st position (abs)
Z0 Z coordinate of 1st position (abs)
Y1 ...Y7 Y coordinate for additional positions (abs or inc)
Incremental dimension: The sign is also evaluated.
Z1 ...Z7 Z coordinate for additional positions (abs or inc)
(only for
Incremental dimension: The sign is also evaluated.
ShopTurn
8.1.11

Position pattern line (HOLES1), grid or frame (CYCLE801)

Function
You can program the following pattern using the "Position pattern" cycle:
● Line (HOLES1)
● Grid (CYCLE801)
● Frame (CYCLE801)
Turning
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
In the "Line" selection option you can program any number of positions at equal distances
along a line.
You can use the "Grid" selection option to program any number of positions spaced at an
equal distance along one or several parallel lines.
If you want to program a rhombus-shaped grid, enter angle αX or αY.
You can use the "Frame" selection option to program any number of positions spaced at
an equal distance on a frame. The spacing may be different on both axes.
If you want to program a rhombus-shaped frame, enter angle αX or αY.
Programming technology functions (cycles)
8.1 Drilling
Unit
Degrees
mm
Degrees
mm
mm
Degrees
mm
mm
mm
mm
273