Selection Of The Cycles Via Softkey - Siemens SINUMERIK 828D Operating Manual

Creating a ShopTurn program

8.14 Selection of the cycles via softkey

8.14 Selection of the cycles via softkey
Overview of the machining steps
The following machining steps are available.
All of the cycles/functions available in the control are shown in this display. However, at a
specific system, only the steps possible corresponding to the selected technology can be
selected.
Drilling cycles only for turning/milling machine
262
⇒ ⇒
⇒
⇒
⇒
⇒
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Turning