Tool Alignment For Turning - Siemens SINUMERIK 828D Operating Manual

Computerized numerical controller for machine tools
Hide thumbs Also See for SINUMERIK 828D:
Table of Contents

Advertisement

Working with a B axis (only 840D sl)

16.2 Tool alignment for turning

16.2
Tool alignment for turning
The input fields for the β and γ angles for aligning the tool are available in the tool screen
and in all turning screens.
β angle
In the entry field "β" you have the possibility of selecting the main alignment of the tool:
Programming when machining with a counterspindle
When machining on the counterspindle, it is programmed in exactly the same way as the
main spindle.
The direction display of the arrows depends on the settings.
γ angle
In the entry field "γ" you have the possibility of selecting the main alignment of the tool:
● 0°
● 180°
- or -
● Free entry field to enter the required angle
824
:
β = 0°
:
β = 90°
Empty
:
The required angle can be freely entered
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Turning

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 840d sl

Table of Contents

Save PDF