Collision avoidance (only 840D sl)
11.1 Activating collision avoidance
Precondition
● Collision avoidance is setup and an active machine model is available.
● The setting "Collision avoidance" has been selected for the AUTO operating mode or for
the JOG and MDA operating modes.
Procedure
666
1.
Select the "Machine" operating area
2.
Press the <AUTO> key.
3.
Press the "Sim. rec." softkey.
4.
Press the "Other views" and "Machine area" softkeys.
An active machine model is displayed for simultaneous recording.
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Turning
Need help?
Do you have a question about the SINUMERIK 828D and is the answer not in the manual?
Questions and answers