Procedure
Parameters, G code program
PL
Machining plane
RP
Retraction plane
SC
Safety clearance
Parameter
Description
Machining posi-
Single position
•
tion
(only for G
Drill hole at programmed position
code)
Position pattern
•
Position with MCALL
Z0 (only for G
Reference point Z
code)
Machining
Face C
•
surface
Face Y
•
(only for Shop-
Peripheral surface C
•
Turn)
Peripheral surface Y
•
Position
At the front (face)
•
(only for Shop-
At the rear (face)
•
Turn)
Outside (peripheral surface)
•
Inside (peripheral surface)
•
Clamp/release spindle
The function must be set up by the machine manufacturer.
(only for Shop-
Turn)
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
1.
The part program or ShopTurn program to be processed has been cre-
ated and you are in the editor.
2.
Press the "Drilling" softkey.
3.
Press the "Centering" softkey.
The "Centering" input window opens.
mm
mm
Programming technology functions (cycles)
Parameters, ShopTurn program
T
Tool name
D
Cutting edge number
F
Feedrate
S / V
Spindle speed or constant cut-
ting rate
9.1 Drilling
mm/min
mm/rev
rpm
m/min
Unit
mm
295