Multi-channel machining
10.2 Multi-channel support
Parameters
Work offset
write to
ZV - only for
work offset
write "yes"
Z4P
Parameters
Function, gripping
Gripping a blank
Also take zero point
Work offset
- for take zero point
"yes"
Coordinate
system
XP
ZP
Flush chuck
DIR
662
Description
Yes
•
The Z value of the work offset can be directly written to the input screen
form.
No
•
The actual Z value of the work offset is used.
Z value of the work offset (abs)
•
Workpiece zero offset in the Z direction (inc); the sign is also evaluated.
•
Park position of the counter-spindle supplementary axis (abs); MCS
Description
Teaching in the park position and angular offset is possible
With counter-spindle
•
The blank is gripped with the counter-spindle
With main spindle
•
The blank is gripped with the main spindle
Yes
•
No
•
Work offset in which the coordinate system offset by Z1 must be saved.
Basic reference
G54
G55
G56
G57
...
MCS
•
The park position is specified in the machine coordinate system. Teaching in
the park position and angular offset is only possible in the machine coordinate
system.
WCS
•
The park position is specified in the workpiece coordinate system.
Park position of tool in X direction (abs)
Park position of tool in Z direction (abs)
Flush counter-spindle chuck
Yes
•
No
•
Direction of rotation
Spindle rotates clockwise
•
Spindle rotates counter-clockwise
•
Spindle does not rotate
•
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Unit
mm
mm
Unit
mm
mm
Turning